NEW BLOG

I have now finished this blog, if you'd like to continue to follow me please go to my new blog www.bridgetfarmer.blogspot.com.
Showing posts with label print. Show all posts
Showing posts with label print. Show all posts

Sunday, March 30, 2008

Print Gocco, Layering.

I thought this time I'd mention how to layer exposures. By this I mean printing one screen, perhaps in colour, then printing a second screen on top, perhaps the outlines in black. It took me a few attempts to get this right the first time.
A few things I realised were -
*Cut down your images to fit the print bed when exposing the screen. This helps you to keep registration correct. (When I say 'registration' I mean one layer fitting perfectly over the next layer.)
*Also cut down the paper you are printing on to fit the print bed, this also helps with registration.Without this I find it is pretty much impossible to get registration correct.
*Use a light box to make sure both images fit well on top of each other. I use a thick perspex sheet balanced on top of an ikea lamp because I don't have a proper light box!
* I sometimes use photoshop to figure out my layers. I first scan in my drawing, then on photoshop I make a new layer and basically colour in the drawing. Then I hide the original image and print out just the coloured in layer. I then sit this printout onto my lightbox with a blank sheet on top and, using the gocco carbon pen, I trace onto the blank sheet. This will be the image I expose first.

This is the carbon drawing for the first exposure, I will print it in three colours. I used the foam blocking tape in between colours on the screen, this stops the colours from running into each other, although it still happens slightly. I think it is part of the charm of print goccos.

So, this is the result of the first exposure. Now I want to make the outlines and a bit of detail. This I take from my original drawing traced in carbon pen. This is the result printed on a blank piece of card just to show the image. For some reason the end of the tail didn't expose onto the screen very well. This is possibly due to only one of the lamps flashing, make sure both lamps are screwed in completely. This may be the reason, but it may not be. It's still a bit of a mystery to me. If anyone has any other possible reasons for this happening I'd love to hear! To correct this I have bought a dark grey ink and I will draw in the tail with my dip ink pen on each print.

This is the final result. It is a haddock, an illustration for one of my mum's recipes for her cookbook. Below is another sequence for an illustration of a pheasant and a chicken.







Friday, February 8, 2008

Back in the APW. Hooray!

Yesterday was my first day back at the Australian Print Workshop. Last year I was at Uni so I used the facilities there, but I'm glad to be back at APW, I missed it.

So I spent a long hard day in the workshop trying to get etchings made for markets and galleries, in 8 hours I managed 16 etchings, it's such a slow labour intensive process, but well worth while. I'm working on editioning two prints at the moment, hopefully I'll have them ready for next weekend.

I always choose to use the little old wooden press, instead of the big spring assisted presses. Apart from it always being free because no one else wants to use it, I like the feeling of really putting all of my effort into turning the wheel and pulling the print through. I am often seen with my feet off the ground putting all my weight onto the arms of the wheel to get it turning. It's good exercise!







For each picture you have to ink up the copper plate, it's a messy process and the ink is very thick. You scrape the ink on with an applicator, then with tarlatan (a mesh like material) you rub the ink into the etched lines. Then with another piece of tarlatan you rub the ink back so the rest of the plate's surface is clean. See how the ink is black in the etched lines but the rest of the plate is clean and coppery. I give the plates a final polish with a page from a phone book and then they are ready to print.

Line up the plates using a template under an acetate sheet, get the soaking paper from the water bath, dry it off a bit, line it up over the plates, fold down the etching blankets, then, with all your might, turn the wheel to pull the print bed through the roller and voila! Your etching has been made. Phew!

Now, start all over again for the next one.


Monday, January 21, 2008

My new toy



After wondering what a gocco print was from seeing so many mentioned on www.etsy.com I started researching into this medium. It is basically a simple home screen printing set invented by a japanese man about 25 years ago. This was before households had computers and he believed everyone should have the means to print their own invitations and cards. I became fascinated by this machine, and wooed by the beautiful images other artists had created using print gocco. So I bought myself one on ebay, found the instructions in english on the internet (the ones supplied were in japanese!) and last week I made my first print. I'm now hooked.


Seven Australian Magpies


This is my first gocco print.




Three Female Satin Bowerbirds

This is my second gocco print.

Now I need to buy more paper so I can make more more more!